Dual W-5910iE Quartz Crystal Etching System

  • Quartz Crystal SMD devices are adjusted to target frequency by Ion Beam Etching of the electrode material
  • The motional parameters of the crystal remain virtually unchanged
  • Sixty four (64) parts are processed simultaneously for high system throughput
  • Small crystal electrodes are as easy to precisely adjust as large electrodes
  • Super High Drive capability
  • Measured parameters are checked against easy to define Q.C. limits
  • Supports small SMD sizes including 3.2x5.0, 3.2x2.5, 2.5x2.0, 2.0x1.6, 1.6x1.25
  • Transport boats carry SMD devices in 16x20 S&A flip pallets
  • Dual boat configuration holds four pallets per run with a total of 1280 parts

SPECIFICATIONS

250B-1 Frequency Range: 15 KHz to 220 MHz
250C Frequency Range: 15 KHz to 500 MHz
Etching Performance: ± 1 ppm typical final frequency

SYSTEM CONFIGURATION

  • Four S&A 250B-1 or 250C Network Analyzers
  • Direct Drive Roughing Pump
  • Cryo Pump
  • Two S&A Dual Channel High Drive Units
  • Two S&A Ion Guns
  • S&A 690B-X2 Elevator
  • Computer
  • Windows® based System Software
  • Light Pole

SCREEN FORMAT

FACILITY REQUIREMENTS

Power: 380V or 208V 3-PHASE, 7 KVA, 50/60 Hz
Inlet Pressures:
    Air:
    Nitrogen:
    Process Gas:
90 – 100 PSIG
70 – 100 PSIG
20 PSIG
Dimensions: Standard - W 65" x D 37" x H 106"
With Elevator - W 65" x D 59" x H 106"