Laser Crystals Available for Immediate Delivery
Normally Laser Crystals are produced to customer specification, but due to cancellation, we have the following crystals immediately available from stock.
Nd:Yag Stock
| Length | Diameter | Doping | Finish | Quantity Available |
|---|---|---|---|---|
| 115 mm | 12.7 mm | 0.7 % Nd | AR/AR, F/F | 5 Request Quote |
| 110 mm | 6 mm x 8 mm slab | 1.1% Nd | AR/AR, wedge angle 59 ° | 1 Request Quote |
| 80 mm | 10 mm | 1.2% Nd | AR/AR, F/F | 3 Request Quote |
| 150 mm | 8 mm | 1.1% Nd | AR/AR, F/F | 2 Request Quote |
Sapphire Wafer Stock
| Reference | Thickness | Diameter | Orientation | Polished | Quantity Available |
|---|---|---|---|---|---|
| SWA5 | 0.9 mm | 3 inches (second rate condition) |
>C-Plane, ±0.25 ° off |
As-Cut | 3750 Request Quote |
| SWA6 | 0.9 mm | 3 inches (condition variable) |
C-Plane, ±0.25 ° off |
As-Cut | 4000 Request Quote |
- AR/AR means that the rod or slab has an AR (Anti Reflective) coating at both ends.
- F/F indicates that the ends of the rod or slab are flat, rather than having a wedge angle.
- FOM is the figure of merit for the Ti:Sapphire material. Figure of merit is measured as the ratio of alpha\820nm : alpha\514nm, Alpha being the absorption measured in cm-1
- C-plane indicates the orientation the sapphire wafer, alternatively designated (0001)
- SSP means single side polished, DSP, double sided polished, As-cut means not polished
Sapphire Wafer Stock
| Length | Width | Diameter | Finish | Quantity Available |
|---|---|---|---|---|
| 19.8 mm | 15.8 mm | 1.5mm ±0.05mm |
Random oriented Polished 80/50 |
150 Request Quote |
