Item from stock available for immediate delivery

Laser Crystals

Normally Laser Crystals are produced to customer specification, but due to cancellation, we have the following crystals immediately available from stock.

Nd:Yag Stock

Length Diameter Doping Finish Quantity Available
115 mm 12.7 mm 0.7 % Nd AR/AR, F/F 5
Request Quote
110 mm 6 mm x 8 mm slab 1.1% Nd AR/AR, wedge angle 59 ° 1
Request Quote
80 mm 10 mm 1.2% Nd AR/AR, F/F 3
Request Quote
150 mm 8 mm 1.1% Nd AR/AR, F/F 2
Request Quote


Sapphire

Wafers

Reference Thickness Diameter Orientation Polished Quantity Available
SWA5 0.9 mm 3 inches
(second rate condition)
>C-Plane,
±0.25 ° off
As-Cut 3750
Request Quote
SWA6 0.9 mm 3 inches
(condition variable)
C-Plane,
±0.25 ° off
As-Cut 4000
Request Quote

  • AR/AR means that the rod or slab has an AR (Anti Reflective) coating at both ends.
  • F/F indicates that the ends of the rod or slab are flat, rather than having a wedge angle.
  • FOM is the figure of merit for the Ti:Sapphire material. Figure of merit is measured as the ratio of alpha\820nm : alpha\514nm, Alpha being the absorption measured in cm-1
  • C-plane indicates the orientation the sapphire wafer, alternatively designated (0001)
  • SSP means single side polished, DSP, double sided polished, As-cut means not polished

Length Width Diameter Finish Quantity Available
19.8 mm 15.8 mm 1.5mm
±0.05mm 
Random oriented
Polished 80/50
150
Request Quote


Other items usually in stock - check with us

Diameter (mm) Thickness (mm) Angle
Quartz Saw Wafers
100.2 0.50 Y+32°
100 0.50 Y+36°
100 0.50 Y+42°
100 0.25 Y+34°
100 0.50 Y+34°
100 0.50 Y+38°
100 0.50 Y+39°
100 0.50 Y+40°
Z Cut Quartz
38X28 0.50
Lithium Tantalate Wafers
100.2 0.50 42°
100 0.35 36°
100 0.35 42°
100 0.35 64°
100 0.35 X-Cut
Lithium Niobate Wafers
76.2 0.50 128°
76.2 0.37 64°
76.2 0.50 Z-Cut mirror/mirror
100 0.35 64°
100 0.35 171°
Subject to prior sale